This is Complete Operator’s Manual for JCB Fastrac 3155, 3185.

Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.

Please read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. Reading operating manual will help you and others avoid personal injury or damage to the machine. The information provided in this manual will provide the operator with the safest and most efficient way to use the machine. Knowing how to operate the machine safely and correctly will enable you to train others to operate the machine.

 

Use this JCB Fastrac 3155, 3185 operator’s manual as a guide, Your machine will remain a reliable working tool provided it is kept in good working condition and serviced properly.

 

Models Covered:

JCB Fastrac 3155
JCB Fastrac 3185

from serial number 640000 onwards

 

Manual Covers:

INTRODUCTION
About this Handbook
The JCB Fastrac
Identification of Machine Components
Safety First
Safety Check List
General Safety
Operating Safety
Maintenance Safety
Safety Decals
Identifying Your Machine
Serial Number Plate
Typical Vehicle Identification Number (VIN)
Typical Perkins Engine Identification Number
Unit Identification

OPERATION
Introduction
Before Entering the Cab
Entering/Leaving the Cab
Doors and Windows
Cab Layout and Controls
Instrument Cluster
Warnings (Visual only)
Warnings (Audible/Visual)
Instruments
Programming
System Error Codes
Wheel Slip
Switches
Air Conditioning and Heater Controls
Seats
Seat Belts
Before Starting the Engine
Steering Column Adjustment
Starting the Engine
Jump-Starting the Engine
Preparing for Travel
Testing the Parking Brake
On Public Roads
Getting the Machine Moving
Travelling
Utilisation of Gears.
General Precautions
Four Wheel Drive and Differential Lock
Automatic Differential Lock
Stopping and Parking the Machine
Using the Machine and Site Safety
Electronic Linkage Control
Area Cut-out System (Optional)
Rear 3 – Point Linkage
Mechanical Connections and Adjustment
Front 3 – Point Linkage (Optional)
Mechanical Connections and Adjustment.
Front Hitch
Removing the 3-Point Linkage Arms
Fitting and Adjusting the DIN 3 Hitch
External Hydraulics
Control Layout
Lever Locking.
Variable Flow Spool Operation
Fixed Flow Spool Operation
Connecting Equipment
Priority Flow Service
Quick Release Couplings
Drawbars and Hitches
Pick-up Hitch
Clevis Drawbar
Roller Drawbar
Connecting Trailer Brakes
Air Brakes
Hydraulic Brakes
Independent Power Take-Off (PTO)
Introduction
Fitting Rear PTO Output Shaft
Attaching Equipment to Rear PTO
Checking the Implement Driveshaft Length.
Rear PTO Operation
Attaching Equipment to Front PTO (Dual Output)
Attaching Equipment to Front PTO (Single Output
Front PTO Operation
PTO Static Guards
Automatic Trailer Couplings
Type 850 RB
Operating in Low Temperatures
Operating in High Temperatures
Moving a Disabled Machine
Transporting the Machine

MAINTENANCE
Service Requirements
Service Schedules
Lubricants – Health and Safety
Fluids, Lubricants Capacities and Specifications
Fastrac 3155
Fastrac 3185
Cleaning the Machine
Checking for Damage
Opening and Closing the Bonnet..
Checking Seat Belt Condition and Security
Greasing.
Checking the Clutch Fluid Level
Brakes
Checking the Footbrake Fluid Level
Draining the Air System Tanks
Checking and Renewing the Footbrake Pads
Checking the Parking Brake Pads
Hydraulic System
Checking the Fluid Level
Engine Air Filter
Changing the Elements
Engine Oil and Filter(s)
Checking the Oil Level
Changing the Oil and Filter(s)
Fastrac 3155
Fastrac 3185
Engine Cooling System
Checking the Coolant Level
Coolant Mixtures.
Draining & Refilling the Coolant
Fastrac 3155
Fastrac 3185
Cleaning the Radiator
Adjusting the Fan Belt (Fastrac 3155)
Fan Belt (Fastrac 3185)
Fuel System
Types of Fuel
Filling the Tank
Fuel Standards
Low Temperature Fuels
Draining the Sediment Bowl
Draining/cleaning the Fuel Pre-filter
Draining the Fuel Filters
Bleeding the Fuel System
Fastrac 3155
Fastrac 3185
Transmission
Checking the Oil Level
Changing the Transmission Oil Filter
Front PTO Transfer Gearbox (Optional)
Checking the Oil Level
Front Axle
Checking the Differential Oil Level
Checking the Hub Oil Levels
Rear Axle
Checking the Oil Level
Automatic Trailer Coupling (if fitted)
Tyres and Wheels
General
Pressures, Speeds and Loads.
Tyre Inflation
Checking Wheel Nut Torques
Adjustable Track Width
Lock Stops
Checking and Adjusting the Front Wheel Alignment
Fender Adjustment
Electrical system
Fuses
Battery
Warning Symbols
First Aid – Electrolyte
Checking the Electrolyte Level
Headlights
Checking Beam Alignment
Windscreen Washer
Air Conditioning
Cleaning the Filter
Adjusting the Compressor Belt
Checking the Sight Glass
Obtaining Replacement Parts

SPECIFICATION
Static Dimensions
Weights and Loads
Tyre Sizes and Pressures – See MAINTENANCE section
WARRANTY

*****

====================
**Total Pages: 144
**File Format: PDF
**Language: English
**Requirements: Adobe PDF Reader & WinZip
**Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

 

NO waiting! You will have instant access to your download! All pages are printable, No shipping fee, No waiting nervously for the postal delivery, you can start doing your repairs right away!

We will always try to get the full satisfaction of our customers. Even after you have purchased this manual, we will pay full attention to any issues, regardless of the nature of the situation.

THE DOWNLOAD LINK WILL ALSO BE SENT TO YOUR E-MAIL.

So please make sure your email address is correct. Don’t Forget to Check Spam / Junk if can’t find the new message in your email inbox immediately.

 

Any questions please contact: admin@servicemanualperfect.com

Thanks for visiting!