This is Complete Operator’s Manual for JCB 8250 Fastrac .

Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.

Please read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. Reading operating manual will help you and others avoid personal injury or damage to the machine. The information provided in this manual will provide the operator with the safest and most efficient way to use the machine. Knowing how to operate the machine safely and correctly will enable you to train others to operate the machine.

 

Use this JCB 8250 Fastrac operator’s manual as a guide, Your machine will remain a reliable working tool provided it is kept in good working condition and serviced properly.

 

Models Covered:

JCB 8250 Fastrac

from serial number 1138000

 

Manual Covers:

Safety Notices
Important Information
The Operator Manual
Safety Warnings
Introduction
About this Manual
Machine Models and Serial Numbers
Using this Manual
Units of Measurement
Left Side, Right Side
Cross References
Using the Machine
Optional Equipment
The JCB 8250 Fastrac
Safety First
Safety – Yours and Others
Safety Check List
General Safety
Operating Safety
Maintenance Safety
Safety Decals
Safety Decal Recognition
Identifying your Machine
Serial Number Plate
Operation
Introduction
Before Entering the Cab
Entering and Leaving the Cab – Doors and Windows
Adjustable Steps
Opening and Closing the Doors
Opening and Closing the Windows
Cab Layout
Seat Controls
Standard Suspension Seat
Heated Seat (Optional)
Seat Belts
Introduction
Fasten the Seat Belt
Check the Seat Belt is Operating Correctly
Release the Seat Belt
Drive Controls, Switches and Instruments
Steering Column Multi-Purpose Switch
Front Console Switches
Side Console Controls
Area Cut-out Socket
Limp Home and Diagnostic Switch and Socket
Starter Switch
Steering Column Adjustment
Instruments
Warnings (Audible/Visual)
Warnings (Visual only)
EMS Programming Mode Levels 0 and 1
Wheel Slip
Air Conditioning and Heater Controls
Cab Interior Light
Auxiliary Sockets
Safety Equipment
Transport Locks
Before Starting the Engine
Starting the Engine
Normal Starting
Cold Starting
Preparing for Travel
Before Travelling on Public Roads
Getting the Machine Moving
General Precautions
Continuously Variable Transmission (CVT)
Anti-lock Braking System (ABS)
Testing the Park Brake
Parking the Machine
Parking on an Incline
Working with your Machine
Using the Machine and Site Safety
Safety Must Come First
Four Wheel Drive and Differential Lock
Rear 3-point Linkage Control
Rear 3-point Linkage Mechanical Connections and Adjustment
Front 3-point Linkage Control (Optional)
Front 3-point Linkage (optional)
External Hydraulics
Quick Release Couplings
Drawbars and Hitches
Ladder Hitches
Connecting Trailer Air Brakes
Connecting Trailer Hydraulic Brakes
Independent Power Take-off (PTO)
Touch Screen Settings
Operating in Low and High Temperatures.
Low Temperatures
High Temperatures
Moving a Disabled Machine
General
Limp Home Mode
Preparation for Towing
Transporting the Machine
Routine Maintenance
Service Requirements
Introduction
Owner/Operator Support
Service/Maintenance Agreements
Initial Service and Inspection (100 Hours)
Obtaining Replacement Parts
Health and Safety
Lubricants
Battery
First Aid – Electrolyte
Service Schedules
How to Use the Service Schedules
Service Schedule Tables
Fluids, Lubricants and Capacities
Coolant Mixtures
Cleaning the Machine
Checking for Damage
Seats and Seat Belts
Seats
Checking the Seat Belt Condition and Security
Checking the ROPS Structure
Bonnet
Opening the Bonnet
Closing the Bonnet
Greasing
General Information
Propshafts and Rear PTO Drive Shaft
Front 3-Point Linkage (Optional)
Front Axle Steering Swivels
Steering Column Universal Joints
Rear Suspension Cylinder Pivots
Hydraulic Lift and 3-Point Linkage
Pick-up Hitch
Automatic Trailer Coupling (if fitted)
Air Conditioning and Heater
Air Conditioning Filters
Cleaning the Heater Filter
Adjusting the Compressor Belt
Brakes
Checking the Foot Brake Fluid Level
Checking the Trailer Air Tank
Checking the Air Tank Warning Lights
Checking and Renewing Foot Brake Pads
Checking the Park Brake Pads
Electrical System
Battery
Jump-starting the Engine
Fuses
Relay Identification
Checking the Beam Alignment
Engine
Changing the Air Filter Elements
Checking the Oil Level
Changing the Oil and Filter
Checking the Crankcase Breather Tube
Cooling System
Checking the Coolant Level
Changing the Coolant Filter
Draining and Refilling the Coolant
Cleaning the Radiator and Coolers
Fan Belt
Fuel System
Types of Fuel
Filling the Tank
Draining the Fuel Filter
Changing the Fuel Filter Elements
Hydraulic System
Checking the Fluid Level
Changing the Filter Element
Emptying the Hydraulic Coupling Drain Reservoirs
Transmission
Checking the Transmission Oil Level
Changing the Transmission Oil Filter
Changing the Transmission Oil and Strainer
Checking the Clutch Fluid Level
Axles
Front Axle
Rear Axle and PTO
Tyres and Wheels
General
Wheel and Tyre Replacement
Checking Wheel Nut Torques
Adjustable Track Width
Tyre Inflation
Checking and Adjusting the Front Wheel Alignment
Fender Adjustment
Power Take-off (PTO)
Front PTO
Rear PTO
Windscreen Washer
Checking Fluid Level
Automatic Trailer Coupling (Optional)
Checking for Wear
Specification
Static Dimensions
Weights and Loads
Unladen Weights
Load Capacities
Laden Weights
Tyres
General
Tyre Pressures, Speeds and Loads
Travel Speeds
General Information
Warranty
Machine Service Record Sheet
Registration Information

*****

====================
**Total Pages: 255
**File Format: PDF
**Language: English
**Requirements: Adobe PDF Reader & WinZip
**Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

 

NO waiting! You will have instant access to your download! All pages are printable, No shipping fee, No waiting nervously for the postal delivery, you can start doing your repairs right away!

We will always try to get the full satisfaction of our customers. Even after you have purchased this manual, we will pay full attention to any issues, regardless of the nature of the situation.

THE DOWNLOAD LINK WILL ALSO BE SENT TO YOUR E-MAIL.

So please make sure your email address is correct. Don’t Forget to Check Spam / Junk if can’t find the new message in your email inbox immediately.

 

Any questions please contact: admin@servicemanualperfect.com

Thanks for visiting!