This is Complete Operator’s Manual for Gehl CT5-16, CT5-16 Turbo Telescopic Handlers.

Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.

Please read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. Reading operating manual will help you and others avoid personal injury or damage to the machine. The information provided in this manual will provide the operator with the safest and most efficient way to use the machine. Knowing how to operate the machine safely and correctly will enable you to train others to operate the machine.

 

Use this Gehl CT5-16, CT5-16 Turbo Telescopic Handlers operator’s manual as a guide, Your machine will remain a reliable working tool provided it is kept in good working condition and serviced properly.

 

Models Covered:

Gehl CT5-16, CT5-16 Turbo Telescopic Handlers

 

Manual Covers:

Introduction
1 SPECIFICATIONS
Identification of the Telescopic Handler
Specifications
Dimension and Load Chart
2 CHECKLISTS
3 SAFETY
Additional Safety Reminders
Before Operation Safety Reminders
Operation Safety Reminders
Servicing Safety Reminders
Modification, Nameplates, Markings and Capacities
Safety Guards and Warning Devices
Safety Decal Locations
4 OPERATING AND SAFETY INSTRUCTIONS
A – Before Starting the Telescopic Handler
B – Operator Instructions
C – Enviroment
D – Visibility
E – Starting the Telescopic Handler
F – Operating the Telescopic Handler
G – Stopping the Telescopic Handler
H – Driving the Telescopic Handler on a Public Highway
I – Driving the Telescopic Handler with a Front-Mounted Attachment
J – Operating the Telescopic Handler with a Trailer Instructions for Handling a Load
K – Choice of Attachments
L – Mass and Center-of-Gravity of Load
M – Transverse Attitude of the Telescopic Handler
N – Picking Up a Load on the Ground
O – Picking Up a High Load
P – Setting Down a High Load
Q – Suspended Loads – Guidelines for “FREE RIGGING/SUSPENDED LOADS”
5 INSTRUMENTS AND CONTROLS
Description
1 – Operator’s Seat
2 – Seat Belt
3 – Control and Signal Lamp Panel
4 – Boom Mounted Work Lights (Option)
5 – Switch Panel
6 – Light Switch, Horn and Indicator Switch
7 – Ignition Switch
8 – Brake Fluid Reservoir and Windshield Washer Access Panel
9 – Brake Fluid Reservoir
10 – Windshield Washer Reservoir
11 – Fuse and Relay Access Panel
12 – Fuses and Relays
13 – Cab Interior Light
14 – Accelerator Pedal
15 – Service Brake Pedal and Transmission Cut-off
16 – Forward/Reverse Lever
17 – Parking Brake Lever
18 – Steering Mode Selection
19 – Hydraulic Controls
20 – Load Charts
21 – Heater Controls (CT5-16 Turbo)
21 – Heater and Air Conditioner Controls (CT5-16 Turbo)
22 – Cab Air Filters (CT5-16 Turbo)
23 – Windshield Defroster (CT5-16 Turbo)
24 – Heater Vents (CT5-16 Turbo)
25 – Door Lock (CT5-16 Turbo)
26 – Locking Handle for Upper Half Door (CT5-16 Turbo)
27 – Releasing Button for Upper Half Door (CT5-16 Turbo)
28 – Handle for Rear Window Opening
29 – Manual Holder
30 – Front Lights
31 – Rear Lights
32 – Backup Alarm
33 – Inclinometer
34 – Engine Block Heater
35 – Radio
Tow Pin
A – Tow Pin
B – Trailer Electric Connector
6 MAINTENANCE
Gehl Original-Equipment Service Parts
Filter Cartridges and Belts
Lubricants and Fuel
Maintenance Instructions
General Instructions
Maintenance
Lubricant and Fuel Levels
Hydraulic Systems
Electrical Systems
Welding
Washing the Telescopic Handler
Storage Instructions
Preparing the Telescopic Handler
Protecting the Engine
Protecting the Telescopic Handler
Returning the Telescopic Handler into Service
Towing the Telescopic Handler
Lifting the Telescopic Handler
Loading the Telescopic Handler on a Trailer
Loading the Telescopic Handler
Tying Down the Telescopic Handler
Service Schedule
A – Daily or Every 10 Hours of Service
B – Every 50 Hours of Service
C – Every 250 Hours of Service
D – Every 500 Hours of Service
E – Every 1000 Hours of Service
F – Every 2000 Hours of Service
G – Periodic Maintenance
H – Every Two Years
7 DECALS
General Information
New Decal Application
Decal Locations
8 ATTACHMENTS
Introduction
Installing Attachments
A – Attachment w/o Hydraulics and Manual Locking Device
B – Hydraulic Attachment and Manual Locking Device
C – Attachment w/o Hydraulics and with Hydraulic Locking Device (Option)
D – Hydraulic Attachment and Hydraulic Locking Device (Option)
E – Attachment w/o Hydraulics and w/ Hydraulic Device (Tri-Function Joystick)
F – Hydraulic Attachment and Hydraulic Locking Device (Tri-Function Joystick)
G – Hydraulic Attachment and Manual Locking Device (Tri-Function Joystick)
Technical Specifications of Attachments
Load Zone Charts
Torque Specifications
Index
Warranty

*****

====================
**Total Pages: 98
**File Format: PDF
**Language: English
**Requirements: Adobe PDF Reader & WinZip
**Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

 

NO waiting! You will have instant access to your download! All pages are printable, No shipping fee, No waiting nervously for the postal delivery, you can start doing your repairs right away!

We will always try to get the full satisfaction of our customers. Even after you have purchased this manual, we will pay full attention to any issues, regardless of the nature of the situation.

THE DOWNLOAD LINK WILL ALSO BE SENT TO YOUR E-MAIL.

So please make sure your email address is correct. Don’t Forget to Check Spam / Junk if can’t find the new message in your email inbox immediately.

 

Any questions please contact: admin@servicemanualperfect.com

Thanks for visiting!