This is Complete Operator’s Manual for Gehl 418T Wheel Loader.
Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.
Please read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. Reading operating manual will help you and others avoid personal injury or damage to the machine. The information provided in this manual will provide the operator with the safest and most efficient way to use the machine. Knowing how to operate the machine safely and correctly will enable you to train others to operate the machine.
Use this Gehl 418T Wheel Loader operator’s manual as a guide, Your machine will remain a reliable working tool provided it is kept in good working condition and serviced properly.
Models Covered:
Gehl 418T Wheel Loader
Manual Covers:
Introduction
Notes on this operator’s manual
Machine: Overview
Brief description
Applications
Regulations
Machine data
Type labels and component numbers
Safety signs and symbols
Safety instructions
Safety instructions
Identification of warnings and dangers
Designated uses
General conduct and safety instructions
Safety instructions regarding operation
Safety instructions for service and maintenance
Warning of special hazards
Operation
Operation
Overview of cab
Overview: Multifunctional lever and consoles
Placing into service
Safety instructions
Placing the machine into service for the first time
Checklists
Driving the machine
Overview of controls:
Warning Lights: overview
Before starting the engine
Starting the engine
Before driving the machine
Driving
Drive ranges
Differential lock
Stopping the machine
Parking the machine
Light system
Signalling system
Cab heating and ventilation
Window wash system
Seat adjustment
Seat belt
Driver’s door and side window
Other controls
Towing and transporting the machine
Working with the machine
General safety instructions
Load diagram
Safe load indicator
Control valve for the telescopic unit: overview
Lowering the telescopic unit with the engine switched off
Relieving pressure the quick couplers on the telescopic unit
Installing an attachment
Connecting pressurized quick couplers
Operation of the telescopic unit
Safety device “Hose burst valve“
Working with standard bucket and pallet forks
Working with pallet forks
Troubleshooting
Troubleshooting
Engine trouble
Possible causes for malfunctions
Maintenance
Maintenance
Introduction
Fuel system
Specific safety instructions
Refuelling
Cleaning the fuel tank
Changing the fuel filter
Cleaning the fuel/water separator
Bleeding the fuel system
Engine lubrication system
Checking the engine oil level
Topping up the engine oil
Changing the engine oil
Changing the engine oil filter cartridge
Engine and hydraulics cooling system
Specific safety instructions
Checking the coolant level/topping up the coolant level
Cleaning the cooling fins
Air filter
V-belt
Checking the V-belt tension
Re-tensioning the V-belt
Hydraulic system
Specific safety instructions
Checking the hydraulic oil level
Topping up the hydraulic oil
Changing the hydraulic oil
Hydraulic oil return filter
Replacing the breather filter
Hydraulic pressure lines
Gearboxes and axles
Rear axle transfer gearbox
Front and rear axle differentials.
Front and rear axle planetary drives
Lubricating the rear axle oscillation-type bearing
Maintenance of the brake system
Specific safety instructions
Checking/topping up brake fluid
Telescopic unit
Lubricating the pivot points of the telescopic unit
Lubricating the telescopic unit
Adjusting the wear pads
Tire care
Inspection work
Wheel change
Heating
Cleaning the dust filter of the heating system
Electrical system
Specific safety instructions
Service and maintenance work at regular intervals
Instructions concerning specific components.
General maintenance work
Cleaning
Bolted connections
Pivots and hinges
Engine fluids and lubricants
Maintenance kits
Helpful information for using the service parts list
Helpful information for using the service parts list
Introduction
Composition of service parts list
Groups
Group overview
Figures
Number index
Symbols and abbreviations
Description of symbols
Abbreviations
Machine data
Helpful information for ordering service parts
Order information
Address for your service part order
Specifications
Specifications
Frame
Engine
Power train
Axles
Brakes
Steering
Work hydraulics
Telescopic unit
Electrical system
Fuse boxes in side console
Main fuses in engine compartment
Relays
Tires
Weights
Noise levels
Vibration
Dimensions
Coolant table
Tightening torques
General tightening torques
Specific tightening torques
Conversion tables
Conversion factors
Specific converted values
Annex
Proofs of maintenance
Maintenance plan model 418T (overview)
Maintenance plan model
418T (maintenance label)
Explanation of symbols used in maintenance plan
Legend for hydraulics diagram, model 418T
Hydraulics diagram model 418T
Electrical diagram 418T
*****
====================
**Total Pages: 192
**File Format: PDF
**Language: English
**Requirements: Adobe PDF Reader & WinZip
**Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
NO waiting! You will have instant access to your download! All pages are printable, No shipping fee, No waiting nervously for the postal delivery, you can start doing your repairs right away!
We will always try to get the full satisfaction of our customers. Even after you have purchased this manual, we will pay full attention to any issues, regardless of the nature of the situation.
THE DOWNLOAD LINK WILL ALSO BE SENT TO YOUR E-MAIL.
So please make sure your email address is correct. Don’t Forget to Check Spam / Junk if can’t find the new message in your email inbox immediately.
Any questions please contact: admin@servicemanualperfect.com
Thanks for visiting!